Hach-lange POLYMETRON 9610 sc SiO2 Operations Manual do Utilizador descarregar pdf (Página 9)

100

101

Figure 5 Ports for six sample streams

1 Sample 6 bypass

drain

6 Sample 2 bypass

drain

11 Sample 2 inlet

2 Sample 5 bypass

drain

7 Sample 1 bypass

drain

12 Air purge inlet

(optional)

3 Sample 4 bypass

drain

8 Chemical drain 13 Sample 3 inlet

4 Sample 6 inlet 9 Case drain for spills

or leaks

14 Sample 4 inlet

5 Sample 3 bypass

drain

10 Sample 1 inlet 15 Sample 5 inlet

Plumb the sample and drain lines

C A U T I O N

Explosion hazard. Use only the supplied regulator from the

manufacturer.

C A U T I O N

Chemical exposure hazard. Dispose of chemicals and wastes in

accordance with local, regional and national regulations.

N O T I C E

Do not connect the drain lines to other lines or backpressure and damage to the

analyzer can occur. Make sure that the drain lines are open to air.

N O T I C E

To prevent backpressure and damage to the analyzer, make sure that the

analyzer is higher than the facility drain(s) used and that the drain line has a

constant downward slope.

N O T I C E

The pressure regulator is set to a fixed pressure and cannot be changed.

Use the supplied tubing (6 mm), Y-strainer with filter and pressure

regulator to plumb the drain and the sample to the analyzer. Refer to

Figure 6. The sample line tubing that goes into the plumbing access

ports must be 6 mm. Tubing of 1/4 in. may be used for the sample line

up to the valve/y-strainer but not into the plumbing access ports of the

analyzer.

English 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 409 410

Comentários a estes Manuais

Sem comentários

Hach-lange POLYMETRON 9610 sc SiO2 Operations Manual do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Hach-lange POLYMETRON 9610 sc SiO2 Operations